Stonini manufactures fire rated, lightweight 3D wall panels from our factory in Sydney, NSW. Our panels are hand-cast from a mineral composite of gypsum, waterbased resin, fibreglass mesh and inert fillers — a composition that is non-combustible, water resistant and mould resistant.
We produce four distinct ranges — 3D Wall Panels, Concrete Wall Panels, Delta (marble-effect) Wall Panels, and Earth Range (rammed earth) Wall Panels — in over 30 profiles. Each panel is individually cast by hand, giving every piece a unique, natural texture that cannot be replicated by machine-pressed or injection-moulded products.
Deep, sculpted profiles that emulate natural stone. Ideal for interior and exterior feature walls. Available in traditional 1800 × 600 mm format and floor-to-ceiling 2700 × 600 mm panels for seamless, large-scale installations.
View 3D range →Lightweight alternative to real concrete. Achieves raw industrial, pitted, board-formed or polished concrete aesthetic without the weight, cracking or expansion issues of actual concrete. Installed in Country Road stores, PwC offices, Flow Athletic and other commercial fit-outs.
View concrete range →Flat-surfaced panels with hand-manipulated colour and pattern that emulate marble, limestone, travertine, sandstone and granite. No erosion, no cracking, no deterioration.
View Delta range →Rammed earth textures for a natural, grounded aesthetic. Pigment is mixed within the material, so colour is consistent through the full panel thickness — if chipped, damage is less visible than surface-painted alternatives.
View Earth range →Stonini wall panels are independently tested by NATA-accredited laboratories for fire performance and VOC emissions.
Group Number 1
Tested by AWTA Product Testing to AS/NZS 3837:1998 and assessed per AS 5637.1:2015. Group 1 is the highest classification for wall and ceiling linings under the NCC.
Not deemed combustible
Tested by Ignis Labs to AS 1530.1:1994. Zero seconds of sustained flaming across all five specimens.
0.072 mg/m²/hr TVOC
Formaldehyde 0.009 mg/m²/hr. Compliant with Green Star Design & As Built V1.3 and Green Star Interiors V1.3 emission limits.
Hand-cast in Sydney
Our Environmental Impact Statement covers raw material sourcing, manufacturing, transport, installation and end-of-life.
Full test details, reports and certificates for specifiers →
Stonini architectural wall panels are specified by designers and architects across Australia for a wide range of applications.
Hotel lobbies, restaurant interiors, bar fronts, RSL and club refurbishments, retail shop fit-outs, office reception areas, shopping centre tenancy refreshes. Group 1 fire rating eliminates compliance barriers in all commercial building classes.
Hospital corridors, aged care facilities, school reception areas, university common spaces. Non-combustible rating and low VOC certification meet the stricter requirements for patient care areas and public buildings.
Feature walls, fireplace surrounds, bedroom accent walls, bathroom wet areas (water resistant), kitchen splashbacks, outdoor entertaining areas and pool surrounds.
Non-combustible certification (AS 1530.1) and water resistant, UV-stable composition make Stonini suitable for exterior facade applications where combustible cladding materials are prohibited.
| Feature | Stonini | Typical Retail PVC/MDF Panels |
|---|---|---|
| Fire Rating | Group 1 (AS/NZS 3837) — all locations, all building classes | Often non-rated or Group 3 — restricted locations |
| Combustibility | Non-combustible (AS 1530.1) | PVC melts; MDF combustible |
| Environment | Interior and exterior | Interior only |
| VOC Emissions | Green Star compliant (0.072 mg/m²/hr TVOC) | Often untested or high-emission |
| Water Resistance | Water resistant, mould resistant | PVC waterproof; MDF swells with moisture |
| Panel Size | 1800 × 600 mm; 2700 × 600 mm; 2400 × 600 mm (select profiles) | Typically 500 × 500 mm |
| Customisation | Any colour (Dulux/Resene/Taubmans); custom profiles | Fixed sizes and colours |
| Material | Tinted composite (can be matched to surface paint) | Surface-painted; chips show substrate |
| Origin | Australian made, Sydney NSW | Mostly imported |
Stonini is an Australian wall panel manufacturer based in St Marys, Sydney, NSW. All panels are designed, hand-cast and finished locally. Australian manufacturing means shorter lead times, custom orders, and the ability to match exact colour and texture specifications.
We supply architectural wall panels across Australia — Sydney, Melbourne, Brisbane, Perth, Adelaide, Darwin, Canberra and regional centres — and export through distributors in Europe, the Middle East and Asia.
For architects and specifiers: Custom panel sizes, colours and textures available on request. Contact our team for specification support, sample panels, NCC compliance documentation, and test certificates.
Transform your interior or exterior with Stonini’s eco-friendly, fire rated wall panels. Whether it’s a complex commercial project or a high-end residential renovation, we provide the expert support and tactile samples you need for a seamless sign-off.
